Hands-Free Kit; Matching A Telephone Display C; Making A Call - PEUGEOT 207 2008 Owner's Manual

04 HANDS-FREE KIT

MATCHING A TELEPHONE
DISPLAY C
For safety reasons and because they require prolonged attention on
the part of the driver, the operations for matching of the Bluetooth
mobile telephone with the RD4 hands-free kit must be carried out
with the vehicle stationary and the ignition on.
Activate the telephone's Bluetooth function and
1 1
carry out a search of the Bluetooth accessories
present for the telephone.
Select the accessory which corresponds to the
2 2
display appears on the multifunction display.
Enter the vehicle's authentication code (=1234).
3 3
Depending on the telephone, you may be asked
to enter this code before the superimposed
Select the YES tab on the display using
4 4
208
The services offered by the hands-free kit depend on the network, the SIM card and the compatibility
of the Bluetooth equipment used.
A list of mobile telephones which offer the best range of services is available from the network.
Contact a PEUGEOT dealer.
1 1
2 2
1 1
YES
RECEIVING A CALL
An incoming call is announced by a ring and a superimposed display
on the multifunction display.
Select the YES tab on the display
pressing OK.
Press the end of the steering wheel stalk to accept
the call.

MAKING A CALL

Press the end of the steering wheel stalk for more
than two seconds to access your directory.
To dial a number, use the keypad on your
telephone.
OK