Access To The Spare Wheel - PEUGEOT 207 2008 Owner's Manual

Access to the spare wheel

(Saloon)
The spare wheel is installed in the boot
According to model, the spare wheel may
be steel or of the "space saving" type.
To gain access to it, refer to the par-
agraph "Access to the tools" on the
previous page.
i
Fixing the steel or "space-
saving" type spare wheel
wheels, it is normal to notice, when
washers do not come into contact
with the steel or "space-saving" type
spare wheel. The wheel is secured
by the conical contact of each bolt.
132
Taking out the wheel
Unscrew the yellow central bolt.
Raise the spare wheel towards you
from the rear.
Take the wheel out of the boot.
Putting the wheel back in place
Put the wheel back in its housing.
Unscrew the yellow central bolt by a
few turns then put it in place in the
centre of the wheel.
Tighten fully until the central bolt
clicks to retain the wheel correctly.
Put the box back in place in the centre
of the wheel.
i
a sensor. The punctured wheel
must be repaired by a PEUGEOT
dealer.