Starting The Vehicle; Locating Your Vehicle; Remote Control Problem; Changing The Battery (Remote Control) - PEUGEOT 207 2008 Owner's Manual

ACCESS

Starting the vehicle

Insert the key in the ignition switch.
The system recognises the starting
code.
Turn the key fully towards the fascia
to position 3 (Starting) .
When the engine starts, release the
key.
Switching the vehicle off
Immobilise the vehicle.
Turn the key fully towards you to position 1
(Stop) .
Remove the key from the ignition switch.
i
Key reminder
If the key is left in the ignition switch,
an audible signal sounds when the
driver's door is opened.

Locating your vehicle

To locate your vehicle, if you have
locked it, in a car park:
press the closed padlock, the courtesy
lights come on and the direction indi-

Remote control problem

Following disconnection of the vehicle
battery, replacement of the remote control
battery or in the event of a remote control
malfunction, you can no longer unlock,
lock or locate your vehicle.
First of all, use the key in the lock to
unlock or lock your vehicle.
Then, reinitialise the remote control.
If the problem persists, contact a
PEUGEOT dealer as soon as possible.
Reinitialisation
Switch off the ignition.
Turn the key to position 2 (Ignition) .
Press the closed padlock immediately
for a few seconds.
Switch off the ignition and remove
the key from the ignition switch.
The remote control is fully operational
again.
Changing the battery
Battery ref.: CR1620/3 volts.
This replacement battery is avail-
able from PEUGEOT dealers.
formed by lighting of this warning
light, an audible signal and a mes-
sage on the multifunction display.
Unclip the casing using a coin at the
notch.
Slide the new battery into its location
observing the original direction.
Clip the casing.
Reinitialise the remote control.