Changing A Bulb - PEUGEOT 207 2008 Owner's Manual

CHANGING A BULB

Procedure for the replacement of a
faulty bulb with a new bulb without the
use of tools.
Front lights
Model with conventional lights
!
Handle the bulbs with a dry
cloth.
carbonate glass with a protective
coating:
do not clean them using a dry
or abrasive cloth, or using a
detergent or solvent product,
use a sponge and soapy water.
136
Model with dipped headlamps with
elliptical module and directional
headlamps
1. Direction indicators
(PY 21 W amber).
2. Side lights (W 5 W).
3. Dipped headlamps (H7 - 55 W).
4. Main beam headlamps
(H1 - 55 W).
5. Directional headlamps
(H7 - 55 W).
6. Fog lamps (H11 - 55 W).
i
In certain climatic conditions (low
temperature, humidity), conden-
sation on the internal surface of
the headlamp glass is normal ; it
disappears a few minutes after the
lights are switched on .
Blown bulb
A message appears on the multifunc-
tion display to indicate the bulb to be
changed.
Refer to the appropriate procedure to
change the corresponding bulb.
Changing the direction indicators
Turn the bulb holder one quarter of
a turn and remove it.
Pull the bulb then change it.
verse order.
i
Amber coloured bulbs, such as
the direction indicators, must be
replaced with bulbs of identical