Yamaha BRX-610 Owner's Manual page 52

Dl[='[o111.'llaL"i_[oIo_[t
• Picture
Screen freezes and
operation buttons do
not work.
Press Ill , then restart playback.
Turn off the power and turn on the power again.
Press and hold (-I_ on the front panel for around 5
seconds to restart this unit.
Video is not output Resolution is set incorrectly. Set to the desired resolution. 38
with the desired
resolution.
Wide-screen video
Aspect ratio of your TV is set incorrectly. Change the aspect ratio of your TV. 38
appears vertically
stretched, or black
bands appear at the
top and bottom of the
screen. Or 4:3 video
appears horizontally
stretched.
This unit needs to be restarted.
Square noise _"_-
Blocks in images may be visible in scenes with rapid --
(mosaic) appears on -_--_ movement due to the characteristics of digital image
the screen. "----_
compression technology.
The playback screen
The disc is a copyright-protected disc. This unit complies with analog copy protection. --
will be disturbed if Some discs contain a copy prohibiting signal. If you
DVD video is try to play back such discs through a VCR, or record
recorded to a VCR, or to a VCR and play back the signal, the copy
played back through protection will prevent normal playback.
a VCR.
The remote control
The remote control is operated outside its For information on the remote control operation 10
does not work nor operation range, range, refer to "Using the remote control".
function properly.
The remote control sensor on this unit is Change the lighting or orientation of this unit.
exposed to direct sunlight or lighting.
The battery is worn out. Replace the battery with new one. 10
There are obstacles between the sensor of Remove the obstacles.
this unit and the remote control.
Cannot connect to Incorrect cable connections. Connect the Network cable properly. 15
the Internet.
The connected equipment is turned off. Turn on the connected equipment, such as the
broadband router or modem.
Connections of the broadband router and/ Connect the broadband router and/or modem
or modem are incorrect, correctly.
The network setting is incorrect. Set the proper value(s) in the network setting. Refer 37
to "Network".
48
En