Yamaha BRX-610 Owner's Manual page 38

Menu/Submenu
Tv
Display Setting
Audio Setting
System
Information
Item
3D Output
TV Screen
Video Out Select
TV System
Color Space
HDMI Deep Color
HDMI 1080p 24Hz
Lip Sync
Video Process
Audio Output
Video Mode
Color Adiust
Noise Reduction
De-interlacing
Mode
HDMI
DRC
Speaker Setting Configuration
2ch Downmix
Test Tone
Subwoofer Size
Post Process UpMix
Function
Selects 3D or 2D _.ideos.
Sets the screen aspect ratio of the connected TV, and adiust
the video output.
Selects the resolution of video output.
Selects the TV System from NTSC/PAL/Multi.
Selects Color Space from YCbCr 4:4:4/YCbCr 4:2:2/Full
RGB/RGB.
Selects HDMI Deep Color from 30 bits!36 bits/Off.
Sets HDM] 1080p 24Hz to Auto/Off.
Adjusts the lag between video and audio, such as when the
mouth movement is out of sync with the voice.
Adjusts the visual image.
Adjusts Brightness!Saturation/Hue t_r each color.
Sets the level of Noise Reduction.
Sets how to detect the video signal.
Selects the output mode of HDMI terminal from Bitstream/
PCM/Off.
Sets the DRC (Dynamic Range Compression).
Sets the audio output from the 5.1 ch surround speaker
terminals.
Sets the audio output from SPEAKERS FRONT L/R
terminals.
Outputs the test tone for speaker setup.
Sets the subwoofer speaker size.
Multi-channelizes the 2-channel audio signal.
Displays software version and MAC address (p. 51).
Page
38
38
38
38
38
38
39
39
39
39
39
39
40
40
40
40
40
40
4O
4O
34
En