Yamaha BRX-610 Owner's Manual page 50

No sound.
The iPod sounds, but
you cannot operate it
with this unit or the
remote control.
The iPod is not connected correctly. Connect the iPod and this unit by a USB cable 12
correctly.
No sound of your No sound of your iPod can be outpnt Use the speakers of this unit.
iPod from the TV. from this unit to the TV through the
HDM] cable.
This unit cannot be The iPod is not supported by this unit. Only iPod classic, iPod nano (2nd, 3rd, 4th, 5th and 12
operated by the 6th generation), iPod touch (l st, 2nd, 3rd, and 4th
remote control, generation), iPhone, iPhone 3G/3GS and iPhone 4
are supported.
The iPod is not connected correctly. Connect the iPod and this unit by a USB cable 12
correctly.
The iPod software version is out of date. Update the iPod software version to the latest. If the --
problem cannot be solved, even with the latest
software, reset the iPod.
You cannot operate The iPod is not connected correctly. Connect the iPod and this unit by a USB cable 12
from the iPod. correctly.
The playback
The iPod you set is not compatible with Only iPod classic, iPod nano (2nd, 3rd, 4th, 5th and 12
information is not the playback int_rmation display. 6th generation), iPod touch (1 st, 2nd, 3rd, and 4th
displayed on the generation), iPhone, iPhone 3G/3GS and iPhone 4
front panel display,
are supported.
The iPod does not
The iPod is not connected correctly. Connect the iPod and this unit by a USB cable 12
charge up.
correctly.
The iPod is not supported by this unit. Only iPod classic, iPod nano (2nd, 3rd, 4th, 5th and 12
6th generation), iPod touch (1 st, 2nd, 3rd, and 4th
generation), iPhone, iPhone 3G/3GS and iPhone 4
are supported.
[n case of a transmission error without a status message appearing on the front panel of this unit, check the connection to the USB
device (refer to page 15).
USB ERROR The connected USB device is not Disconnect the USB device. Change input source 15
playable on this unit. other than USB and select USB as input source
The USB device is connected at an again. Then connect playable USB device again.
angle.
The file in the USB
device does not play.
The USB device is not recognized. Connect the USB device again. 15
Connect an AC adapter if supplied with the device.
Incorrect USB device connections. Connect the USB device again. 15
The file tUrmat is not compatible with Replace the file with a correctly recorded file 3
this unit. playable with this unit.
If the solutions above do not resolve the Try another USB device.
problem, the USB device is not playable
on this unit.
46
En