Yamaha BRX-610 Owner's Manual page 45

When [TV System] is set to [NTSC]
q:llqiil+/qi'Ir -
Playback BD
480p Max 480i 480p 720p 60 Hz 1080p 60 Hz
others
Playback BD
VIDEO 480i OFF 480i 480i OFF
others
When [TV System] is set to [PAL]
Playback BD
576p Max 576i 576p 720p 50 Hz 1080p 50 Hz
others
Playback BD
VIDEO 576i OFF 576i 576i OFF
others
When [TV System] is set to [Multi]
When [TV System] is set to [Multi], vide() signal is output at the same frequency as the source. Refer to the tables above
for details on the frequency setting of the TV and resolution of the output video signal.
While a menu screen such as SETUP menu is displayed, video signal is output at the same frequency as the source.
• "Max" in the table means that resolution is set to the maximum resolution supported by the connected TV.
• [HDM[ 1080p 24Hz] setting is disabled when output resolution is other than [HDM[ 1080p].
• No signals are output from the VIDEO jack when output resolution is set to [HDM[ Auto], [HDM[ 720p], [HDM[ 1080i], or [HDM[
1080p].
• When [TV System] is set to [NTSC] and video source is not 60 Hz, the video output signal is converted to 60 Hz.
• When [TV System] is set to [PAL] and video source is not 50 Hz, the video output signal is converted to 50 Hz.
41
En