Advertisement
1/2X3"~
FIGURE 2
STEP 2:
¯ LOOSELY assemblethe PLATEHOLDEP--S
(7) andtheLOWERCROSS
SUPPORT (2) totheUPRIGIff-f FRAMES (8) as
FIGURE 2 using four 1/2 X 3" BOLTS (13), and four 1/2" LOCKNUTS
(15),
¯ LOOSELYassembletheUPPERCROSSSUPPORT(1)
tothetopsetofholesoftheupRIGHTFRAMES(8)assh°wninFIGURE2nsing
two 1/2 X3" BOLTS (13), two 1/2" WASHERS
(14), andtwo/2" LOCKNUTS
(15).
¯ LOOSELY
assemble the GUN RACKS (21) to the outside of the UPRIGHT
FRAMES
(8) as sho~inFIGURE
2 using six 1/2 X 3" BOLTS
(13), fo~ 1/2" WASHERS
(14), arid six 1/2" LOCKNUTS
(15).
SECURELY
tighten all connections made to up to this point.
~
1/2
I
1/2
i
1/~
Advertisement
