Table of Contents
Advertisement
Purpose of This Guide
This guide provides you with a list of what you received, what you require, a product overview,
a list of the supporting documentation, and instructions to help you install the product.
What You Received
The Stand-alone Server Configuration includes
•
The Mitel Networks™ 6500 Server platform (note that a monitor is not included with
the platform). The server has all of the required software installed.
•
For digital network interface integrations: a Voice Technologies Group (VTG) card, a
Natural Micro Systems (NMS) card, a Digital Network Interface (DNI) cable (3 meters
long) for an eight-port system or two DNI cables (both 3 meters long) for a 16-port
system.
•
For Q.SIG integration: a Mitel Networks 3300 Integrated Communication Platform
(ICP), a Universal Network Services Unit (NSU), and a fiber cable.
•
A security access module (SAM).
•
A sheet that lists your software options and system software password.
•
Two Mitel Networks 6500 Unified Communications Application Software Discs.
•
Two Mitel Networks 6500 Unified Communications Third-Party Software Discs.
•
The Windows™ NT 4.0 Server Software CD.
•
The Windows NT 4.0 Service Pack 5 (or greater) CD.
•
The Mitel Networks 6500 Unified Communications Installation and Maintenance Guide.
The Upgrade Package includes
•
A sheet that lists your software options and system software password.
•
Two Mitel Networks 6500 Unified Communications Application Software Discs.
•
Two Mitel Networks 6500 Unified Communications Third-Party Software Discs.
•
The Mitel Networks 6500 Unified Communications Installation and Maintenance Guide.
Tip: Use the FCI or Configuration Tool on Mitel OnLine to determine if your hardware is
able to support the software upgrade.
Note: 6500 Unified Communications Release 4.0 requires a minimum of 768 megabytes
(MB) of random access memory (RAM).
56004892, Revision A
1
Advertisement
Table of Contents
