Orion TV32LB2000(H) Operating Instructions Manual page 21

Other convenience functions
Settings
Other Settings
Installation
Automatic channel scan
Manual channel scan
Analog fine tune
Reset TV Setting
Channel list
Media Browser
3DH0114B_EN.indd 21 3DH0114B_EN.indd 21
Selected Items
Menu Timeout
Off/15/30/60 sec
Auto Power Off
Off/1/2/4 hours
Power On LED
On / Off
AV1 Input
Auto/RGB/CVBS/
SVideo
4:3 Mode
16:9 / 4:3
Motion 100Hz
Off / Low / Medium /
High
Scan Encrypted
Yes/No
Backlight
Level 0 ~ 10
Blue Background
On / Off
Software upgrade
Automatic scanning
Enabled /
Disabled
Scan for upgrade
USB Upgrade
Audio Description
Audio Description
On / Off
Available Languages
Preferred Language
Relative Volume
Hearing impaired
On / Off
Setup hint
The Menu is cleared automatically as per this setting.
When the Set and Remote key operation are not
operated with specified period by this setting(1/2/4
Hours), the power status is changed to stand by mode
automatically.
To cancel the lighting of indicator (P.7 (2)) during
operation, set to "Off".
The signal format of SCART1 input can be set in this
item.
To change the overscan ratio in the some case when
picture size is "Auto". The overscan ratio becomes same
picture size as the one selected in this item.
To change the setting of motion enhancement. A
smoother motion may be obtained by this setting.
To select whether an encrypted channel is registered in
channel map.
The brightness of backlight is controlled as per this
setting.
To sets back screen picture to blue if there is no signal
in ATV Mode.
If "Enabled" is selected, automatic function of detecting
OAD is enabled.
(In some countries, this feature is not available.)
To scan all frequency to confirm if OAD can be
performed.
Upgrade the software with the USB drive.
You can set the Visual Impaired Audio.
To select the audio language of Visually Impaired Audio
that the signal has.
To set the audio language of Visually Impaired Audio
previously. If the viewing channel does not have the
same language of the Visually Impaired Audio as this
setting, the first language included in the input signal is
selected.
To set the audio volume of Visually Impaired audio.
The hearing impaired subtitle type is output
preferentially.
See page 12.
Select "Yes", then press ENTER. Reset the TV function
will now begin, and this unit will automatically turn off.
See page 12-13.
Press ENTER to display the Media Browser. (See page
22)
21
5/12/11 9:45:55 AM 5/12/11 9:45:55 AM