Orion TV32LB2000(H) Operating Instructions Manual page 5

Important safety information
How to attach the stand
NOTE:
• Unplug the AC cord from the AC Outlet terminal.
• Before beginning this process, assure that TV is laid on a clean, safe, and cushioned space to avoid any
damage to the unit.
• Do not touch or press the TV-screen, glass might break under pressure.
• Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.
1) Place the TV on its front onto a table.
2) Align the stand's bottom-plate (supplied) as seen here.
It will fit in only one direction.
3) Hold the unit and attach the stand slowly. Finally secure the bottom-plate with screws(included).
TV32...
NOTE:
• To detach the stand, perform these steps in reverse order.
Dismantling the base
For wall mounting, the base must be dismantled. To do this, remove screws (N, see page 10) from the back.
Take off the base entirely.
Warning (TV46...)
To prevent injury, this apparatus should be securely attached to the floor/wall in accordance with
the installation instructions.
1. Please use two strong strings of the same length as distance (A) between the back of the unit and the wall.
2. Please tie the string to the place in the figure below.
3DH0114B_EN.indd 5 3DH0114B_EN.indd 5
TV42... / TV46...
Screw
Clamp
String
String
A
5
5/12/11 9:45:40 AM 5/12/11 9:45:40 AM