PC connection
Follow these steps: On your PC monitor choose a resolution of 1360 × 768 at 60Hz and save this
configuration. Shut down your PC and connect the shut off LCD TV.
Use a screensaver to avoid burning-in of static picture content.
Select PC input
Switch on the LCD-TV.
Select the PC input mode (see page 12).
Supported PC resolutions
resolution
1360x768
1280x1024
Connecting an HDMI or a DVI device to the HDMI input
The HDMI input receives digital audio and uncompressed video from a HDMI equipped device or
uncompressed digital video from a DVI equipped device.
When you connect to a DVI device with a HDMI-to-DVI adapter cable, it only transfers the video signal, so it
is necessary to use separate analogue leads to transfer the audio signals.
Select the HDMI input mode (see P.12).
Audio cable (not supplied)
To DVI output
To HDMI output
Note:
•
Follow the user's manual that came with the HDMI-system, which you try to connect to this TV.
24
3DH0114B_EN.indd 24
3DH0114B_EN.indd 24
Use a PC-VGA cable (not supplied) to connect the LCD-Monitor
to your PC. Make the connections carefully so as not to break or
bend the contacts inside the plug.
TV (Rear view)
fps (Hz)
60
60
Note:
•
If no signal or a signal with a non-supported resolution is
connected, No Signal is displayed
•
As this LCD-TV is not a PC monitor correct display cannot be
guaranteed for every PC / graphics card.
•
In the PC input mode, Sharpness, Colour, Noise Reduction
and Film Mode are not available.
HDMI - to - DVI adapter cable
(HDMI type A connector)
(not supplied)
DVI device
or
HDMI cable
(type A connector)
HDMI device
(not supplied)
Audio cable (not supplied)
to PC/DVI AUDIO input
VGA Cable (not supplied)
TV (Rear view)
To PC/DVI AUDIO input
PC
TV (Side view)
TV (Rear view)
5/12/11 9:45:56 AM
5/12/11 9:45:56 AM