Glow Plugs; Sectional View - Jacobsen SXG323 Service Manual

Fig. 13-69
2) Installation of the brush holder
Install the brush holder sideways along with the
IC regulator.

6. GLOW PLUGS

6.1. SECTIONAL VIEW

Fig. 13-71
CHAPTER 13. ELECTRICAL ACCESSORIES
Fig. 13-70
Note:
• The clearance between the brush holderandthe
connector should be 1 mm or more.
• Rubberpackingfor the brush holder should not
be deformed or pinched.
• As the terminals have screws different in length,
be sure not to confuse them when installing.
145
13