SA-AK330GC / SA-AK330GN
9.13. Replacement for the pinch roller ass'y and head block
· Follow the (Step 1) - (Step 2) of Item 9.3 - Disassembly of Top Cabinet
· Follow the (Step 1) - (Step 6) of Item 9.4 - Disassembly of CD Lid
· Follow the (Step 1) of Item 9.5 - Disassembly of Rear Panel
· Follow the (Step 1) - (Step 3) of Item 9.6 - Disassembly of CD Mechanism Unit
· Follow the (Step 1) - (Step 3) of Item 9.10 - Disassembly of Front Panel Unit
· Follow the (Step 1) - (Step 5) of Item 9.11 - Disassembly of Deck Mechanism Unit
* The mechanism as shown below is for DECK1. For DECK
2, perform the same procedures.
9.14. Replacement for the Deck motor ass'y, capstan belt A, capstan belt B
and winding belt
· Follow the (Step 1) - (Step 2) of Item 9.3 - Disassembly of Top Cabinet
· Follow the (Step 1) - (Step 6) of Item 9.4 - Disassembly of CD Lid
· Follow the (Step 1) of Item 9.5 - Disassembly of Rear Panel
· Follow the (Step 1) - (Step 3) of Item 9.6 - Disassembly of CD Mechanism Unit
· Follow the (Step 1) - (Step 3) of Item 9.10 - Disassembly of Front Panel Unit
· Follow the (Step 1) - (Step 5) of Item 9.11 - Disassembly of Deck Mechanism Unit
Step 1 Release the 2 claws, and then remove the head
connector.
Step 2 De-solder plunger point.
Step 3 Remove the Deck Mechanism P.C.B.
Step 1 Release the 2 claws, and then remove the pinch roller
(R), (F).
Step 2 Release the 2 claws, and then remove the head
connector.
Step 3 Remove 2 screws.
32