Table of Contents
Advertisement
10.8. Replacement for the pinch
roller ass'y and head block
· Follow the (Step 1) - (Step 2) of Item 10.2 - Disassembly of
Top Cabinet and Rear Panel
· Follow the (Step 1) - (Step 5) of Item 10.2.1 - Disassembly
for CD Lid
· Follow the (Step 1) - (Step 2) of Item 10.3 - Disassembly of
the CD Mechanism Unit
· Follow the (Step 1) of Item 10.4 - Disassembly the Main
P.C.B. & Transformer P.C.B.
· Follow the (Step 1) - (Step 2) of Item 10.5 - Disassembly of
the Panel P.C.B. & Tact Switch P.C.B.
· Follow the (Step 1) - (Step 5) of Item 10.6 - Disassembly for
the Deck Mechanism Unit & Deck P.C.B.
* The mechanism as shown below is for DECK1. For the
one of DECK 2, perform the same procedures.
10.9. Replacement for the Deck motor ass'y, capstan belt A, capstan belt B
and winding belt
· Follow the (Step 1) - (Step 2) of Item 10.2 - Disassembly of
Top Cabinet and Rear Panel
· Follow the (Step 1) - (Step 5) of Item 10.2.1 - Disassembly
for CD Lid
· Follow the (Step 1) - (Step 2) of Item 10.3 - Disassembly of
the CD Mechanism Unit
· Follow the (Step 1) of Item 10.4 - Disassembly the Main
P.C.B. & Transformer P.C.B.
· Follow the (Step 1) - (Step 2) of Item 10.5 - Disassembly of
the Panel P.C.B. & Tact Switch P.C.B.
· Follow the (Step 1) - (Step 5) of Item 10.6 - Disassembly for
the Deck Mechanism P.C.B.
Step 1 Release the 2 claws, and then remove the head
Step 1 Release the 2 claws, and then remove the pinch roller
(R), (F).
Step 2 Release ther 2 claws, and then remove the head
connector.
Step 3 Remove 2 screws.
connector.
Step 2 De-solder plunger point.
Step 3 Remove the Deck Mechanism P.C.B.
31
SA-AK220E / SA-AK220EB
Advertisement
Table of Contents
