Step 4 Unsolder the plunger terminals (2 points).
Step 5 Unsolder the motor terminals (2 points).
Step 6 Release the 2 claws (A), and then remove the Motor P.C.B.
Step 7 Release the claw (B), and then remove the motor ass'y.
[Notice for motor ass'y installation]
1. Locate the name plate of motor to the traverse ass'y.
2. Align the hole of motor with the ribs.
10.14. Replacement for the pinch roller ass'y and head block
53
PDF created with pdfFactory Pro trial version
www.pdffactory.com