Prohibitions (Don'ts); Warnings - mycom 1612LSC series Instruction Manual

1.1.2

Prohibitions (Don'ts)


Do not remove or relocate any safety device, including electrical interfaces.
 Do not disable any safety device by short-circuiting or bypassing without any permission.

Do not leave this product unsafe and unattended, by removing a safety cover or some other
measures.
 Do not touch, clean or lubricate any part of this product which is moving.

Do not touch relays or electric systems such as terminal block with bare hands when turning
on the power.
1.2

Warnings

The warning messages described in this manual warn dangerous situations that may arise during work
by using the following four categories.
Neglecting such warnings may cause accidents, resulting in personal injury or even death.
Also, this product or its auxiliary equipment may be heavily damaged. Therefore, be sure to always
observe the instructions of the warnings.
Symbol
Indicates a hazardous situation which, if not avoided, could very likely cause serious
injury or death.
Indicates a potentially hazardous situation which, if not avoided, may cause serious
injury or death.
Indicates a potentially hazardous situation which, if not avoided, may cause minor or
moderate injury.
Indicates a potentially hazardous situation which, if not avoided, may result in property
damage.
Compound 2-stage Screw Compressor
1612LSC Speed Increaser Type
Table 1-1 Warning Symbols and their Meanings
1-3
2202L5JE-DA-C5-N_2015.05.
Meaning
1. Safety
1.2 Warnings