Access Files From The Internet - D-Link DIR-816L User Manual

Section 3 - Configuration
Below are step-by-step instructions on how to access files from the Internet from your USB drive or external hard drive that is connected to your
DIR-816L router:
Step.1.-.Enable.SharePort.Web.Access
Under SharePort Web Access, check Enable.SharePort.Web.Access to
enable. Then enter the port(s) for HTTP or HTTPS (secure). The default
for HTTP is 8181 and HTTPS is 4433.
Step.2.-.Create.a.User.Account
Under User Creation, enter a User.Name and Password. Verify Password.
and then click Add/Edit.
Step.3.-.Configure.your.Access.Path
Under User List, click the Edit icon for the user you just created. You will
see an Append New Folder window with the name of the new user in
the User Name field. Click on Browse to locate the folder on your USB
storage device or external hard drive for which you want to assign
access to the user.
Step.4.-.Save.Settings.
If you want to add more users, repeat steps 2 and 3. Once you are
finished, click the Save.Settings button at the very bottom to save
your settings.
Note: The SharePort Access Link (at the bottom) will display the URL(s)
you can use to connect.
Also, If you want to use HTTPS, you must type in HTTPS:// instead
of HTTP:// to get a secure connection. Remember to type the port
number after the colon. For example, if you selected HTTPS and
changed the port to 3200, and your WAN IP address is 1.2.3.4, then you
would enter HTTPS://1.2.3.4:3200 to connect.
D-Link DIR-816L User Manual

Access Files from the Internet

53