Table of Contents
Advertisement
PB (Pedal Bend)
This lets you use the pedal to get a pitch bend effect.
The EXP pedal automatically switches to the pedal bend
function when PB is selected.
* Because of the need to analyze the pitch, chords (two or more
sounds played simultaneously) cannot be played.
"Setting the Operation of the EXP Pedal (EXP Pedal
Function)" (p. 54)
Parameter/
Explanation
Range
Pitch Min
This sets the pitch at the point where the ex-
-24–+24
pression pedal is fully lifted.
Pitch Max
This sets the pitch at the point where the ex-
-24–+24
pression pedal is all the way down.
Pdl Position (Pedal Position)
0–100
Adjusts the pedal position for pedal bend.
Effect Level
0–100
Adjusts the volume of the pitch bend sound.
Direct Level
0–100
Adjusts the volume of the direct sound.
OC (Octave)
This adds a note one octave lower, creating a richer sound.
Parameter/
Explanation
Range
Range
This selects the pitch range for the input
Range 1, 2, 3, 4
sound to which you want to add the effects.
Range 1
7th string, open (B) to 1st string, 24th fret (E)
Range 2
7th string, open (B) to 1st string, 12th fret (E)
Range 3
7th string, open (B) to 1st string, open (E)
Range 4
7th string, open (B) to 4th string, 2nd fret (E)
Octave Level
Adjusts the volume of the sound one octave
0–100
below.
Direct Level
0–100
Adjusts the volume of the direct sound.
Chapter 4 Introduction to Effects and Parameters
RT (Rotary)
This produces an effect like the sound of a rotary speaker.
Parameter/
Range
Speed Sel (Speed Select)
Slow, Fast
Rate (Slow)
0–100,
BPM
–BPM
Rate (Fast)
0–100,
BPM
–BPM
* When the Rate (Slow) or Rate (Fast) set to BPM, the value of each
parameter will be set according to the value of the Master BPM (p. 51)
specified for each patch. This makes it easier to achieve effect sound
settings that match the tempo of the song (synchronizing the cycle to
one-half or one-fourth of the BPM when the set cycle rate is increased).
When setting to BPM, press PARAMETER [
display the Master BPM settings screen.
Rise Time
0–100
Fall Time
0–100
Depth
0–100
Explanation
This parameter changes the simulated
speaker's rotating speed (Slow or Fast).
This parameter adjusts the speed of rotation
when set to "Slow."
This parameter adjusts the speed of rotation
when set to "Fast."
] several times to
This parameter adjusts the time it takes for
the rotation speed to change when switched
from "Slow" to "Fast."
This parameter adjusts the time it takes for
the rotation speed to change when switched
from "Fast" to "Slow."
This parameter adjusts the amount of depth
in the rotary effect.
45
Advertisement
Table of Contents
