Table of Contents
Advertisement
4. Repeat Steps 2 and 3 to change each parameter's
settings.
5. Press [TUNER/BYPASS] or [EXIT] to return to the Play
screen.
Parameter/
Explanation
Range
TUNER Pitch
fig.07-112d
435–445 Hz
Sets the reference pitch.
The frequency of A4 (the middle A on a piano keyboard) played by
an instrument (such as a piano) that provides the pitch to which the
other instruments refer in tuning before a performance begins is
called the reference pitch.
* This is set to 440 Hz when shipped from the factory.
TUNER Out
fig.07-113d
Mute, Bypass
Selects the output while Tuner is on.
Mute
Sounds are muted, and no sound is output.
Bypass
Sounds input to the GT-8 bypass the processing and are output di-
rectly as is.
When this is set to "Bypass," and Tuner is set to ON, you can adjust
the volume of the direct sound by operating the expression pedal.
* This is set to "Bypass" when shipped from the factory.
Switching Tuner On and Off with the CTL Pedal
With the CTL Pedal Function (p. 54), set the pedal setting
"Tuner On/Off" allows you to switch Tuner on and off
with the CTL pedal.
Switching Tuner On and Off by Lifting Up
on the EXP Pedal
When the EXP pedal is functioning as a Foot Volume
control, set one of the ASSIGN 1–8 Assign Variable
settings (p. 57) to one of the following settings.
With this setting, you can switch on Tuner by drawing
back the EXP pedal.
Target:
TUNER On/Off
Target Min:
On
Target Max: Off
Source:
EXP PEDAL
Mode:
Normal
Act. Range Lo: 0
Act. Range Hi: 1–127
Chapter 7 Other Features
77
Advertisement
Table of Contents
