Using The Configuration Utility - D-Link DFL-600 Manual

Using the Configuration Utility

Launch your web browser and type the device IP address and port number
(http:// 192.168.0.1:8081) in the browser's address box. This is the default IP
address of your DFL-600. Press Enter.
The following dialog-box will appear to prompt you to enter the DFL-600's
default User Name and Password. The DFL-600's default User Name is
admin and the default Password is also admin − all lower case.
Click OK to open the Home menu.
Note: Please make sure that the computer you will use to connect to and
configure the DFL-600 is assigned an IP address that is in the same range as
the DFL-600. The IP address of the DFL-600 is 192.168.0.1. All computers
on your network must be within that range, for instance, the computer IP
address could be any IP address from the range 192.168.0.2 to 192.168.0.254,
with a subnet mask of 255.255.255.0.
12