Table of Contents
Advertisement
3/8 x 3" 29
3/8 x 3-3/4"
30
24
FIGURE 16
STEP 16:
•
Refer to cable ILLUSTRATION "A" on page 11 for cable routing while installing pulleys.
•
[CABLE MUST BE POSITIONED BETWEEN PULLEY AND LOWER BOLT ASSEMBLY ON
LEG PEDESTAL (11) AND FRAME (1)]
• Securely assemble the ball end of the LOW CABLE (21) and one 3-1/2" PULLEY (24) to the LEG PEDESTAL (11) using two
3/8 X 3-3/4" BOLTS (30), two 3/8" X 1-1/16" FLANGE SPACERS (42), two 3/8" WASHERS (36), and two 3/8" LOCKNUTS (34).
(NOTE: The LEG CABLE (21) should be routed over the retaining bolt as shown in FIGURE 16.)
• Securely assemble one 3-1/2" PULLEY (24) to the FRAME (1) using one 3/8 X 3" BOLTS (29), and one 3/8" LOCKNUT (34).
(NOTE: The LEG CABLE (21) should be routed over the retaining bolt as shown in FIGURE 16.)
11
21
36
18
1
42
34
34
Hide quick links:
Advertisement
Table of Contents
