Connecting the Connection Cord
14
E-
The indoor unit is powered from the outdoor unit via the connection cord.
1
Remove the screw on the electrical component box and remove the cover
plate.
2
Route the connection cord through the side of the indoor unit and connect
the cable to terminals; refer to the figure below.
3
Route the other end of the cable to the outdoor unit through the ceiling &
the hole on the wall.
4
Reassemble the electrical component box cover, carefully tightening the
screw.
Wiring Diagram
Indoor Unit
Outdoor Unit
Communication
Next Indoor unit(Power)
Next Indoor unit
(Communication)
Power