Table of Contents
Advertisement
4
This chapter explains how to isolate and solve
10/100BASE-T4 PCI adapter problems.
Make sure that the adapter is correctly installed. (See Chapter 2
for installation instructions.)
This chapter contains information about the following topics:
Diagnostic tests overview
Starting the diagnostic program
Getting help if a test fails
Changing the test setup
Miscellaneous checks
The 3Com diagnostic program is a DOS program. If you are
running an operating system or interface other than DOS,
refer to the section "Accessing DOS" in Chapter 3.
Troubleshooting with the Diagnostic Tests
The diagnostic tests on the 3C59X EtherDisk diskette check the
adapter's overall operation and permit the isolation of faults.
You can run the diagnostic tests after installing the
10/100BASE-T4 PCI adapter, or when a fault is suspected.
If the tests in their default configuration do not isolate the
problem, you can change the test parameters to meet specific
situations.
P
ERFORMING
T
ROUBLESHOOTING AND
D
IAGNOSTIC
T
ESTS
Advertisement
Table of Contents
Need help?
Do you have a question about the 10/100BASE-T4 and is the answer not in the manual?
Questions and answers