Accessing Dos; Loading The Drivers; Loading The Network Drivers; Summary Of Driver Loading Procedures - 3Com 10/100BASE-T4 User Manual

3
This chapter describes how to load the network drivers
required to let the 3C595-T4 PCI adapter operate with your
network operating system. This information is arranged
according to the following topics:

Summary of driver loading procedures

Using the EtherDisk diskette

Accessing DOS

Loading network drivers
Summary of Driver Loading Procedures
Table 3-1 summarizes the driver loading procedures based
on the network operating system running on your computer.
Table 3-1 Summary of Driver Loading Procedures
Network Operating System
Windows 95
NetWare ODI:
client environment
NetWare ODI:
server environment
(versions 3.1X, 4.0X, 4.X)
â
DEC PATHWORKS
â â
Banyan VINES
â
IBM LAN Server
â
Microsoft LAN Manager
â
Artisoft LANtastic
Windows NT 3.5x
Windows for Workgroups
L
OADING THE
D
RIVERS
Driver Loading Procedure
Windows 95 will detect the presence of the T4 adapter
and request a driver for it. Refer to the section "Using
Windows 95."
AutoLink auto installation software loads all NetWare client
software, including drivers, if a single adapter is being
installed in a NetWare DOS ODI client. Refer to the section
"One Adapter in a Client" under "Using NetWare ODI."
Load the appropriate server drivers from the EtherDisk
diskette. Refer to the section "One or More Adapters in a
Server" under "Using NetWare ODI."
â
Load the appropriate NDIS driver from the EtherDisk
diskette. Refer to the section "Loading NDIS Drivers."
â
Follow the instructions in the README.TXT file on the
EtherDisk diskette. If updating a driver, refer to the
section "Updating NDIS Drivers."
N
ETWORK