Table of Contents
Advertisement
Step 2: Install memory modules
The motherboard has 3 dual inline memory module (DIMM) sockets. The BIOS will automatically
detects memory type and size. To install the memory module, just push it vertically into the DIMM
socket. The DIMM module can only fit in one direction due to the notch. Memory size can vary
between sockets.
Support Unbuffered DDR DIMM Sizes type:
64 Mbit (2Mx8x4 banks)
128 Mbit(2Mx16x4 banks)
512 Mbit(16Mx8x4 banks)
Install memory in any combination table:
DDR1 (Bank 0&1)
SS
DS
SS
DS
DS
SS
DS
DS
DS
SS: Single Side, DS: Double Side
Note:
1. GA-8STXC can only support 4 banks of DDR333.
2. If you mix DDR266 and DDR333 then all modules will run as DDR266.
GA-8STXC Motherboard
This Manual: http://www.manuallib.com/file/2597476
64 Mbit (1Mx16x4 banks)
256 Mbit(8Mx8x4 banks)
512 Mbit(8Mx16x4 banks)
DDR2 (Bank 2&3)
none
none
SS
SS
DS
SS
SS
DS
DS
- 9 -
128 Mbit(4Mx8x4 banks)
256 Mbit(4Mx16x4 banks)
DDR3 (Bank 4&5)
none
none
none
none
none
SS
SS
SS
DS
Advertisement
Table of Contents
