Center Speaker Block - Sony HT-ST7 Service Manual

HT-ST7

2-13. CENTER SPEAKER BLOCK

5 screw
(PTPWH3
7 center speaker block
6 three screws
(BVP-tite 3 8)
4 Remove the cable with connector (SPC2)
from three hooks of center speaker block.
4 Remove the cable with connector (SPC1)
from three hooks of center speaker block.
1 Install cables with connector (SPC1, SPC2) to the hook of the center speaker block.
cable with connector (SPC2)
2 Install cables with connector (SPC3) to the hook of the center speaker block.
3 Install cables with connector (SPC4) to the hook of the center speaker block.
14
3 Remove the cable with connector (SPC3)
from three hooks of center speaker block.
8)
guide pin
ditch
cable with connector (SPC1)
cable with connector (SPC4)
2 Remove the cable with connector (SPC4)
from three hooks of center speaker block.
1 saranet cushion
5 screw
(PTPWH3 8)
Note 1: When installing the center speaker
center speaker block
cable with connector (SPC3)
block, align the guide pin and ditch.
Note 1: Please spread a sheet under
a unit not to injure front side.
– Rear bottom view –
4 Paste the saranet cushion.