Using An External Center Speaker - Sony SAVA-27 Operating Instructions Manual

Using an External Center
Speaker
Since this system incorporates a center speaker (see
page 8), you don't have to connect a center speaker.
However, it is possible to connect a center speaker, if
you already have one, to the EXTERNAL CENTER
SPEAKER terminals. Be sure to use a speaker with a 4
to 8 ohm impedance for the center speaker.
front speaker (left)
IMPEDANCE USE 4 - 8Ω
EXTERNAL
CENTER SPEAKER
Use a screwdriver and remove the screw holding the
CENTER SPEAKER button cover in place. Then
depress the CENTER SPEAKER button. This turns off
the internal center speaker and directs the center
channel signal to the EXTERNAL CENTER SPEAKER
terminals.
IN T E R N
Connecting an external center speaker lets you choose
from 4 different Dolby Pro Logic Surround center
modes: NORMAL, WIDE, 3 CH (3 Channel logic), or
PHANTOM. Use the NORMAL or WIDE mode. For
details on Dolby Pro Logic Surround sound, see page
15.
SURROUND
1
Press SURROUND on the front speaker (left) to
choose PRO LOGIC. ("PRO LOGIC EXTERNAL"
appears in the display instead of "PRO LOGIC"
when you press PRO LOGIC on the remote.)
2
Press CTR MODE on the front speaker (left) a few
times until the center mode you want appears in
the display.
center speaker
C E N T E
R S P E A
K E R
A L
o
O
CTR MODE
Home Theater Operations
3
Adjust the speaker volumes and delay time, if
necessary, by referring to page 11.
13