Connection And Setting - Panasonic VQT0C55 Operating Instructions Manual

RECORDING
This chapter explains the connection, setting and operation methods required to use this unit
as a recorder.
This unit cannot be used as an editing system recorder.
Connection
When connected to a video device equipped with a DV terminal
Images can be recorded with almost no deterioration of image quality.
Separately available
Player
DV cable
DV terminal
Another VTR
Memo
• When signals are input from the DV terminal, the sound recording mode of the recorder is the same
as that of the player.
• The Date and time data from the DV terminal will be recorded.
• To record the time code data from the DV terminal, set the DV TC DUP. item of the TIME CODE
☞
menu to ON. ( Page 58)
This unit is connected to a video device with no DV terminal (analogue input) :
Y/C(S) video cable
S-VIDEO
OUT
VIDEO OUT
AUDIO
OUT
Player
Another VTR
Memo
• When search pictures or low-quality video signals are input, video and sound output may be tempo-
rarily distorted. Please input stable signals via a TBC, etc.
• For analogue input, use either Y/C(S) video cable or video cable. Set the front [INPUT] input video
signal selection switch according to the chosen cable.
DV terminal
WARNING :
SHOCK HAZARD - DO NOT OPEN.
AVIS :
RISQUE DE CHOC ELECTRIQUE - NE PAS OUVRIR.
DV IN/OUT
AUDIO
CH 1/3 CH 2/4 LINE
Flow of
signal
Video cable
VIDEO LINE IN
Audio cable
AUDIO
IN
WARNING :
SHOCK HAZARD - DO NOT OPEN.
AVIS :
RISQUE DE CHOC ELECTRIQUE - NE PAS OUVRIR.
DV IN/OUT
AUDIO
CH 1/3 CH 2/4 LINE
Flow of
signal
– Connection and setting –
Recorder
VIDEO
I
N
9PIN REMOTE
DC
NTSC PAL
O
AUX
U
T
S -VIDEO
Recorder
S-VIDEO IN
VIDEO
I
N
9PIN REMOTE
DC
NTSC PAL
O
AUX
U
T
S -VIDEO
Monitor
12V
Monitor
12V
E-33