Table of Contents
Advertisement
PLAYBACK
The output mode for audio playback can be selected with the remote controller.
POWER
VCR
DISPLAY
STILL
BARS
BLANK
MODE
AUDIO
MUTING
MENU SEARCH+
OUT SEL.
SET
SEARCH–
OUT LEV.
A.DUB
PAUSE
F.REV
F.ADV
PLAY
REW
STOP
INDEX
–
VEQ3533
Memo
• The output channel for playback audio of
tapes recorded in the 32kHz mode can also
be set via the AUDIO OUT SEL item of the
AUDIO/VIDEO menu of the main unit.
• The audio output level can be set via the
AUDIO OUT LEVEL item of the AUDIO/
VIDEO menu.
☞
(
Page 57 "AUDIO/VIDEO menu")
– Selecting playback audio output –
/I
AUDIO MUTING
button
OUT SEL.
button
OUT LEV.
button
REC
FF
INDEX
+
To turn the audio muting function ON/
OFF or to mute the EE audio, press the
AUDIO MUTING button.
To resume the audio output, press the button
again.
Selecting the audio output channel for
playback of tapes recorded in the 32kHz
mode.
Each time the OUT SEL. button is pressed, the
channel changes in the following sequence:
CH1/CH2
CH3/CH4
• CH3/CH4 : CH3 audio is output via the CH1/3
AUDIO OUT terminal whereas
CH4 audio is output via the CH2/4
AUDIO OUT terminal.
• MIX
: Sounds mixed from CH1 and CH3
are output via the CH1/3 AUDIO
OUT terminal whereas Sounds
mixed from CH2 and CH4 are out-
put via the CH2/4 AUDIO OUT ter-
minal.
Note
Depending on the sound source, noise may
occur in the MIX mode. In this case, please
use CH1/CH2 or CH3/CH4.
Select the output level for audio play-
back
Each time the OUT LEV. button is pressed, the
standard level for the output audio level changes.
(NORMAL or ATT)
• When the output level is set at ATT, the audio
output level is decreased by 8dB.
• To play back tapes recorded on this unit, set
the output level to NORMAL.
MIX
E-47
Advertisement
Table of Contents
