Table of Contents
Advertisement
NAMES AND FUNCTIONS OF VARIOUS PARTS
POWER
AG-DV2500
MIC
8
[REC] Record button/LED
● Hold down this button and press the 9 PLAY
button to start recording. During recording, the
LED lights up red.
● Hold down this button and press the 0 PAUSE
button to pause the recording.
● When this button is pressed during recording,
an index signal is recorded on the tape (valid
when the INDEX WRITE item in the SYSTEM
menu is set to ON).
● When recording is stopped, the time code gen-
erator value can be verified by holding this but-
ton down. If the DV TC DUP. menu item is set
to ON, EE signals of the DV Input time code
and Date/Time can be verified.
9
[PLAY] Play button/LED
● Press this button to start playing back a tape.
During playback, the LED lights up green.
● When the menu is displayed, use this button
to select the menu items or setting values.
0
[PAUSE] Pause button/LED
● During recording, press this button to pause it.
During playback or STOP mode, press this
button to enter the STILL mode. When record-
ing is paused or when the unit is in the STILL
mode, the LED lights up green.
● When recording is paused, press this button
to resume recording.
● If this button is pressed simultaneously with
the A.DUB button in the STILL mode, the Au-
dio Dubbing Pause mode will be engaged.
● When the menu is displayed, use this button
to confirm the menu items or setting values.
E-12
A.DUB
CH
REMOTE
INPUT
OFF
LINE
9PIN
WIRELESS
DV
S-VIDEO
8
DVCAM
NTSC
PAL
REC INH.
1 / 3
2 / 4
AUDIO
#
!
[FF] Fast forward button/LED
● When the unit is in the STOP mode, press
this button to execute fast-forward winding of
the tape.
● When the unit is in the PLAYBACK or STILL
mode, press this button to execute fast-for-
ward playback.
● During fast-forward winding or fast-forward
playback, the LED lights up green.
● When the menu is displayed, use this button
to display selected menu items.
When setting up the date, time or time code,
use this button to select the data segment.
@
[STOP] Stop button/LED
● Press this button to stop operation. (of rewind,
playback, etc.)
● When the menu is displayed, use this button
to select the menu items or setting values.
#
[REW] Rewind button/LED
● When the unit is in the STOP mode, press
this button to rewind the tape.
● When the unit is in the PLAYBACK or STILL
mode, press this button to execute reverse
playback.
● During rewinding or reverse playback, the LED
lights up green.
● When the menu is displayed, press this but-
ton to return to the previous screen.
When setting up the date, time or time code,
use this button to select the data segment.
– Front panel –
9
EJECT
MENU
REC
PLAY
PAUSE
SET
REW
FF
STOP
@
(continued)
0
!
Advertisement
Table of Contents
