HP 5500 HI Series Installation Manual page 49

Use Telnet, web, or SNMP to access the IRF fabric from the network management station. (See HP
3.
5500 HI Switch Series Fundamentals Configuration Guide.)
Check that you can manage all member switches as if they were one node.
4.
Display the running status of the IRF fabric by using the commands in
5.
Table 7 Displaying and maintaining IRF configuration and running status
To do...
Display information about the IRF fabric
Display all members' configurations that take effect after
switch reboots
Display topology information about the IRF fabric
NOTE:
To avoid IP address collision and network problems, configure at least one multi-active detection (MAD)
mechanism to detect the presence of multiple identical IRF fabrics and handle collisions. For more
information about MAD detection, see
Use the command...
display irf
display irf configuration
display irf topology
HP 5500 HI Switch Series IRF Configuration Guide
44
Table 7.
.