HP 5500 HI Series Installation Manual page 34

Figure 40 Removing the filler panel over an interface card slot
Hold the captive screws on the front panel of the interface card, and gently push the interface card
3.
in along the slot guide rails until the interface card is in close contact with the switch chassis (see
callout 1 in Figure
Tighten the captive screws with a Phillips screwdriver to secure the interface card in the slot (see
4.
callout 2 in Figure
Figure 41 Installing an interface card
Figure 42 LSP5GT8P in the chassis
41.)
41).
29