The Front Panel At A Glance - Agilent Technologies 34410A User Manual

The Front Panel at a Glance

1 Multimeter On/Off Switch
2 Front/Rear Terminal Selection Switch 14 AC Voltage measurement function key (shifted function: AC Current)
3 HI Sense Terminal (also 4-wire
4 LO Sense Terminal (also 4-wire
5 HI Input terminal
6 LO Input terminal
7 Current Input terminal
8 Left navigation key (< integration )
9 Right navigation key (> integration)
10 Up navigation key (> range)
11 Down navigation key (< range)
12 Enter key
WA R N I N G
Front/Rear Switch: Do not change the position of the Front/Rear switch on the front panel while signals are
present on either the front or rear set of terminals. This switch is not intended as an active multiplexer.
Switching while high voltages or currents are present may cause instrument damage and lead to the risk of
electric shock.
8
13 DC Voltage measurement function key (shifted function: DC Current)
Ω
) 15 2-wire Ohms measurement function key (shifted function: 4-wire Ohms)
Ω
) 16 Second Display key (shifted function: Multimeter Reset)
17 Data Logger Function Key (shifted function: Utility Menu)
18 Exit key (when not in a menu, also toggles Auto Range function on/off)
19 Frequency/Period measurement function key (shifted function: Capacitance)
20 Continuity measurement function key (shifted function: Diode Check)
21 Configuration Menu key (shifted function: Temperature)
22 Null function key (shifted function: Math Menu)
23 Trigger key (shifted function: Auto Trigger Menu)
24 Shift key (also returns multimeter from remote to Local operation)
34410A/11A User's Guide