Line Configurations; Figure 24 - Activate / Deactivate A Line Service; Figure 25 - Select Service Provider And Use Service Provider Provisioning - Fanvil X3 User Manual

<文档标题>
5.3

Line Configurations

A line must be configured properly to be able to provide telephony service. The line configuration is
like a virtualized SIM card. Just like a SIM card on a mobile phone, it stores the service provider and
the account information used for registration and authentication. When the device is applied with the
configuration, it will register the device to the service provider with the server‟s address and user‟s
authentication as stored in the configurations.
To configure a line manually, user may open the line configuration screen by long-pressing line key
or through soft-menu buttons [Settings] -> [Line] -> [Line1] / [Line2] from the
standby screen.
NOTICE! If user has set PIN code in user profile, user must enter correct PIN code to be able
to edit line configuration.
User should activate a line to get the line in service or deactivate the service to put the line inactive.
To activate or deactivate the service of a line, switch the line activation option with [Left/Right] arrow
buttons.

Figure 24 - Activate / Deactivate a Line Service

User should also configure the corresponding parameters as provided or advised by the service
provider. The other parameters and screens are listed in below pictures.

Figure 25 - Select Service Provider and Use Service Provider Provisioning

(Please refer to 5.1 Configuration Wizard – Step 3)
Fanvil Technology Co., Ltd
HQ Add: Level 3, Block A, Gaoxinqi Building, Anhua Industrial Park, Qianjin 1 Road, 35th District, Bao'An, Shenzhen, 518101 P.R. China
Tel: +86-755-2640-2199 Fax: +86-755-2640-2618 Email: sales@fanvil.com support@fanvil.com Beijing Tel:+86-10-5753-6809
Suzhou Tel: +86-512-6592-0605 SEA Tel: +60-3-512-21997