Removing A C7000 Device Bay Divider - HP BL860c i4 Installation Manual
Hide thumbs
Also See for BL860c i4:
- User's & service manual (163 pages) ,
- Instructions manual (10 pages) ,
- Firmware update manual (15 pages)
Table of Contents
Advertisement
1.
Remove the device bay blank.
2.
Remove the three adjacent blanks.
Removing a c7000 device bay divider
1.
Slide the device bay shelf locking tab to the left to open it.
2.
Push the device bay shelf back until it stops, lift the right side slightly to disengage the two
tabs from the divider wall, and then rotate the right edge downward (clockwise).
Installing and powering on the server blade
5
Advertisement
Table of Contents
