Merogram Configuration - Promax TV EXPLORER HD User Manual

TV EXPLORER HD / HD
USER'S MANUAL.
On the Y-axis are placed the carriers. In this axis the initial and final carriers are
showed and depend on the 8k/4k/2k mode. Next to the final carrier the number of carrier
MER
and the level where the cursor are placed is showed.
To move among the parameters press the cursor keys
To change a parameter, press the arrow keys
selector.

5.17.2.1 Merogram Configuration

Before the capture begins the options must be configured. Press the key,
[17] and the option menu will be displayed.
Temporal reference
Begin:
The captured information will be showed on the display with initial reference 0 s
and it is placed on the left edge. In this option the screen is not update with news
acquisitions unless the cursor is moved at the end of the capture.
Using the temporal position, the cursor can be move through the entire file and
the display will be updated according to the new temporal reference.
This option is very useful to visualize the captured information. For example if
the elapsed time is 500 sg and we want to show the 200 s, this number must be
filled in the temporal position. The cursor will be moved to and the screen will be
updated showing the new levels signals.
End:
Selecting this option, the cursor is related to the last acquisition time. If the
temporal reference
of the capture, therefore the screen always shows the last acquired data.
This option is very useful if we want to work during the capture process due to
the problems can be detected in real time and the cursor can be moved at any
temporal reference. When a temporal movement is introduced, noticed that a
negative sing is placed before the number by default. This is due to the
displayed data on the screen is captured in real time so that if we want to
analyze a previous point we should go backward in the time. For example if the
elapsed time is 500 s and we want to go to the second 200, the temporal
t
position must be filled with — 300 s.
10/2012
LE
is
filled with 0 seconds, the cursor will be placed at the end
UP DOWN
or .
LEFT RIGHT
or or use the rotary
Page 77