Dvb-T/H (Cofdm) Signal - Promax TV EXPLORER HD User Manual

Noise and impairments cause the demodulator to not always read the symbols
correctly. In this case the hits disperse and create different shapes that at the end will
allow to determine at a glance the type of noise in the signal
Each type of modulation is represented in a different way. A 16-QAM signal is
represented on screen by a total of 16 different zones and a 64-QAM is represented by a
diagram of 64 different areas and so on.
The constellation shows in different colours the density of hits and includes
zooming, scrolling and clearing functions for a better graph representation on screen.

5.15.1 DVB-T/H (COFDM) signal

Activate the
CONSTELLATION
received during the digital signal transmision.
Figure 41.-
By means of the rotary selector
possible to change the frequency, channel or
DECAY
The
a range from 0 (minimum) to 16 (maximum).
First appears the information about the type of modulation
Next it is indicated the frequency, the channel and the carrier tuned. It is also indicated
the carrier type (data or pilot). Finally, it shows the status line (similar to the
measurement screen).
Page 64
UTILITIES
menu by pressing the
option. Now, on screen will be recorded the hits due to symbols
Constellation Diagram.
option sets the visual persistence for symbol impacts on the screen in
USER'S MANUAL.
[22] key, and select the
DVB-T/H 64 QAM
(
[1] and the arrow cursors
COFDM
carrier on tune by the instrument.
TV EXPLORER HD / HD
) signal.
[6] key, is
DVB-T/H 64 QAM
(
10/2012
LE
).