Diseqc Command Generator - Promax TV EXPLORER HD User Manual

TV EXPLORER HD / HD
USER'S MANUAL.
To move the Gain vertical axis press the cursor arrow up or down
Hold the up arrow
per division.
Hold the down arrow
per division.

5.26 DiSEqC Command Generator

DiSEqC ('Digital Satellite Equipment Control') is a communication protocol
9
between the satellite receiver and the accessories of the installation (switches, LNBs,
etc.) proposed by Eutelsat, with the aim to standardize the diversity of switching
protocols (13 - 18 V, 22 kHz) and to satisfy the demands of the digital TV installations.
In order to define and/or to send a sequence of
DiSEqC
key [21] on frontal panel. It allows to define the satellite band configuration
parameters and select through
which execute basic functions to control an universal switch with two or four inputs, by
means of the rotary selector
Whenever a DiSEqC program is sent, the commands that correspond to the
equipment status in relation to the Horizontal or Vertical polarization and High or Low
frequency band are also sent. This allows assuring that the installation status is the one
indicated by the equipment.
9 DiSEqC
TM
is a trademark of EUTELSAT.
10/2012
LE
[6] for half a second to change the vertical axis to 10 dB
[6] for half a second to change the vertical axis to 5 dB
SEND
function one of the eight predefined programs
[1].
Figure 70
.- DiSEqC command screen.
[6].
DiSEqC
commands, press the
Page 97