Spectrum Exploration Function (Explorer) - Promax TV EXPLORER HD User Manual

TV EXPLORER HD / HD
USER'S MANUAL.
The user can also define the pilot frequencies:
From the calibration screen, press the key
CONFIGURATION
menu of the measure. The
signals manually. To do this, using the rotary selector
MANUAL
change it to . You will see a menu where you can set the frequency of each of
the 3 pilot signals. If you want to return to the automatic generation of pilot signals,
PILOTS
change back function to
2.- MEASUREMENT OF THREE PILOTS THROUGHOUT THE NETWORK
TV EXPLORER
Once
measurements in the different distribution outlets using the
HD
. On the screen will appear the attenuation values for the three pilot frequencies
LE
measured in the outlet plate (see the following figure).
Figure 17.-
In order to finish measuring, press the rotary selector
option.

5.12 Spectrum exploration function (EXPLORER)

Exploration
The
identify the analogue channels and digital presents, in agreement with the configuration
set, over the active channel plan. In order to activate the function hold pressed the
EXPLORER
[25] key until the
10/2012
LE
AUTO
.
HD / HD
has been calibrated, start to make level
LE
Attenuation measurements in an outlet plate.
function allows exploring the full frequency band in order to
screen appears.
[17] to show on screen the
PILOTS
function allows you to set pilot
[1] select that function and
TV EXPLORER
[1] and select the (
HD /
EXIT
)
Page 41