External Units Power Supply - Promax TV EXPLORER HD User Manual

Use key
[17] key to show the
Signal
option by turning and pressing the rotary selector
allows setting the type of signal to measure. When switching to a new type, the
TV EXPLORER HD
type of signal.
5.7

External Units Power Supply

TV EXPLORER
The
external units (antenna preamplifiers, in the case of terrestrial TV, LNB in the case of
satellite TV, or IF simulators).
In order to select the supply voltage of the external units, press
the screen will display a functions menu labelled
voltages (which will depend on the band being used). Turn the rotary selector
the desired voltage and press to activate it. The following table shows the choice of
supply voltages:
Band
SATELLITE
TERRESTRIAL
MATV
Page 32
[17] to switch between analogue and digital channels. Press the
measurements CONFIGURATION
/ HD
activates the last measurement configuration used for that
LE
HD / HD
LE
(Master Antenna Television)
Table 3.-
External units powering voltages.
USER'S MANUAL.
can supply the voltage needed to power the
EXT. SUPPLY
Powering voltages
Output: Enabled / Disabled
External
5 V
13 V
15 V
18 V
24 V
13 V + 22 kHz
18 V + 22 kHz
Output: Enabled / Disabled
External
5 V
13 V
15 V
18 V
24 V
TV EXPLORER HD / HD
menu and select the
Signal
[1]. The option
[11] key, and
listing the choice of
10/2012
LE
[1] to