Loading The User Defaults; Menu Protection - Panasonic AJ-YA120AG Operating Instructions Manual

Setup (initial settings)

Loading the user defaults

1
Set the LOCAL/MENU/REMOTE switch to the
MENU position.
The unit is set to the menu setting mode, and the
menu screen appears on the video monitor.
2
Press the RESET button.
The unit is now set to the default setting mode,
and the default setting screen now appears on
the video monitor.
SELECT MODE
0 ESCAPE
2
1 LOAD
2 SAVE
3 PROTECT
3
Press the MENU-UP button or MENU-DOWN
button to move the cursor to the LOAD
position, and press the SET button.
The unit is set to the LOAD mode, and the LOAD
screen appears on the video monitor.
SET–UP MENU
NO
2
FACTORY
USER (ALL)
USER (NOT SYSTEM)
4
Press the MENU-UP button or MENU-DOWN
button to move the cursor to the USER (ALL)
position, and press the SET button.
O When the cursor is moved to USER (NOT
SYSTEM) and this operation is performed,
everything except the SYSTEM menu settings
operates according to the user settings stored
in the memory.
O When the cursor is moved to NO and this
operation is performed, the display returns to
the menu screen without changing to the user
settings stored in the memory.
5
Set the LOCAL/MENU/REMOTE switch to the
LOCAL or REMOTE position.
This completes the menu setting procedure.
26
<LOAD>

Menu protection

By setting the unit to the menu protection mode, the
setup menu can no longer be opened even when the
LOCAL/MENU/REMOTE switch is set to the MENU
position.
1
Set the LOCAL/MENU/REMOTE switch to the
MENU position.
The unit is set to the menu setting mode, and the
menu screen appears on the video monitor.
2
Press the RESET button.
The unit is now set to the default setting mode,
and the default setting screen now appears on
the video monitor.
SELECT MODE
0 ESCAPE
2
1 LOAD
2 SAVE
3 PROTECT
3
Press the MENU-UP button or MENU-DOWN
button to move the cursor to the PROTECT
position, and press the SET button.
The unit is set to the menu protection setting
mode, and the screen prompting the user to
confirm the menu protection appears on the
video monitor.
MENU PROTECT OK?
NO
2
YES
4
To initiate menu protection, press the MENU-
UP button or MENU-DOWN button to move
the cursor to the YES position, and press the
SET button.
The menu screen now appears.