Panasonic AJ-YA120AG Operating Instructions Manual page 38

Setup menus
OPERATION
Item
Superimposed
No. No.
display
110 AUTO REW
0000
0001
112 FRZ MODE SEL
0000
0001
114 REC INH LAMP
0000
0001
115 EJECT SW INH
0000
0001
118 SP MODE INH
0000
0001
150 SEARCH SPEED
0000
0001
152 HUMID OPE
0000
0001
154 AUTO BACK
0000
0001
0002
160 MEMORY MODE
0000
0001
0002
0003
" " indicates the factory setting.
38
Setting
Superimposed
display
For setting whether the tape is to be automatically rewound to its beginning when
the tape end is detected.
OFF 0: The tape is not rewound.
ON 1: The tape is rewound to its beginning.
For setting the video output when the mode is transferred from playback images to
standby OFF (half loading).
DIS 0: The video output is muted.
STBOFF 1: When the standby OFF (half loading) mode is established, the image played
back at that moment is frozen and output.
For setting the operation of the REC INHIBIT lamp when the cassette is set to the
erasure prevention status.
LIGHT 0: The lamp lights.
FLASH 1: The lamp flashes.
<Note>
When the REC INHIBIT switch on the front panel is set to ON, the REC INHIBIT
lamp lights at all times regardless of what setting is selected for this menu item.
For setting whether to restrict the operation of the EJECT button on the front panel.
REC 0: Operation is inhibited while the unit is in the recording mode.
OFF 1: The EJECT button can be operated in all operation modes.
For selecting whether to enable or disable recording on a tape which has been
recorded using a format other than DVCPRO HD-LP.
OFF 0: Recording onto the cassette tape is enabled.
ON 1: Recording onto the cassette tape is disabled.
For setting the search still, cue and review speed.
X4.1 0: 4.1k normal tape speed
X8.4 1: 8.4k normal tape speed
For setting the unit's operation when condensation has formed.
OFF 0: The unit does not operate when condensation has formed.
ON 1: It operates even when condensation has formed but no guarantees are made
that the operation will be trouble-free.
<Note>
Since operating the unit when condensation has formed may damage the tape or
give rise to other trouble, the "0" setting (no operation) is recommended under
normal circumstances.
For setting how the follow-on recording function is to be used.
(For setting the AUTO BACK function operation which rewinds the tape for several
seconds in order to ensure that the video images follow on one from another with
no disruptions.)
OFF 0: The tape is not rewound automatically (no AUTO BACK).
REC-P 1: The tape is rewound (AUTO BACK) during REC PAUSE, and it then stops in the
recording standby status. (When PAUSE is released, the tape runs up, and
recording starts.)
ALL 2: In addition to the function of the 0001 REC-P setting, the tape is rewound
(AUTO BACK) during REC PLAY, the tape immediately runs up, and recording
starts.
For setting the repeat playback mode.
OFF 0: No repeat playback (normal operation).
M-STOP 1: The tape stops near the BEGIN point when it is fast forwarded or rewound.
REPT1 2: When the tape reaches the END point, it is rewound to the BEGIN point, and
stops.
CONT 3: When the tape reaches the END point, it is rewound to the BEGIN point, and
plays back, and this is done repeatedly.
Description of settings