Panasonic AJ-YA120AG Operating Instructions Manual page 39

Setup menus
OPERATION
Item
Superimposed
No. No.
display
161 CTL BGN
or
TC BGN
162 END
163 REPT MODE
0000
0001
0002
180 BATTERY SEL
0000
0001
0002
0003
0004
0005
0006
181 TYPE-A NEAR 0000
0044
182 TYPE-A END 0000
0034
183 TYPE-B NEAR 0000
0044
184 TYPE-B END 0000
0034
" " indicates the factory setting.
Setting
Superimposed
display
For setting the BEGIN point in the repeat playback mode.
Either TC or CTL is set as the counter display mode using the COUNTER button.
If no mode is set, – – : – – : – – : – – appears, and the tape start serves as the
BEGIN point.
For setting the END point in the repeat playback mode.
Either TC or CTL is set as the counter display mode using the COUNTER button.
If no mode is set, – – : – – : – – : – – appears, and the tape end serves as the END
point.
For setting what images are to be output while the tape returns to the BEGIN point
in the repeat playback mode.
FREEZE 0: The tape returns to the BEGIN point with the image played back at the END
point still frozen.
BLACK 1: The tape returns to the BEGIN point while the screen remains black.
SW 2: The tape returns to the BEGIN point following the setting selected by the
TAPE/EE switch.
<Note>
If the tape end is set as the END point when "0:FREEZE" is selected, the playback
image will not be frozen properly.
Set the END point to a place within the range where images are recorded.
For setting the type of battery.
NiCd12 0: 12 V-type battery
NiCd13 1: 13 V-type battery
NiCd14 2: 14 V-type battery
S-LION 3: Setting for using the BP-L90A lithium-ion battery.
I-LION 4: Setting for using the ENDURA80 lithium-ion battery.
TYPE-A 5: Setting for using the battery selected by the menu item No.181 [TYPE-A NEAR]
item and No.182 [TYPE-A END] item
TYPE-B 6: Setting for using the battery selected by the menu item No.183 [TYPE-B NEAR]
item and No.184 [TYPE-B END] item
10.6 For setting (in increments of 0.1 V) the voltage level at which the counter flashes as
: : warning for TYPE-A battery (selected as the menu item No.180 [BATTERY SEL]
15.0 item).
<Note>
When this item has been set to a voltage level close to 15.0 V, the counter display
may flash even when an AC power source is being used.
10.6 For setting (in increments of 0.1 V) the voltage level at which the TYPE-A battery
: : (selected as the menu item No.180 [BATTERY SEL] item) is to be automatically
14.0 turned off.
10.6 For setting (in increments of 0.1 V) the voltage level at which the counter flashes as
: : warning for TYPE-B battery (selected as the menu item No.180 [BATTERY SEL]
15.0 item).
<Note>
When this item has been set to a voltage level close to 15.0 V, the counter display
may flash even when an AC power source is being used.
10.6 For setting (in increments of 0.1 V) the voltage level at which the TYPE-B battery
: : (selected as the menu item No.180 [BATTERY SEL] item) is to be automatically
14.0 turned off.
Description of settings
39