Atv And Other Modes; Pc Mode - Akai ATE-24D604 User Manual

ATV AND OTHER MODES

- Press SOURCE button on the unit or remote control to select desired input source.
- For these modes, please refer to the menu operations of DTV mode, except for PC MODE
as below.

PC MODE

- Connect a personal computer to this unit.
- Power on your computer and this unit.
- Press SOURCE button on the unit or remote control to select PC input source.
- Press MENU button to display the main menu. Select Setup using UP/DOWN navigation
button. Then press OK or RIGHT navigation button to enter submenu.
- Select PC Setup and enter it.
- Press UP/DOWN navigation button to select preferred item.
- Press OK or RIGHT navigation button to enter submenu. Press LEFT/RIGHT navigation
button to adjust the value.
1. Auto Adjust
This item is used to adjust the PC screen automatically.
2. H Position
This item is used to adjust the value of horizontal position (available range: -16 to 16).
3. V Position
This item is used to adjust the value of vertical position (available range: -16 to 16).
4. Phase
This item is used to adjust the picture apply to the TV (available range: 0 to 100).
5. Clock
This item is used to adjust the signals transfer speed (available range: 50 to +50).
NOTE: For other menus, please refer to the menu operations of DTV mode.
43