Routing Diagram - PR 9106B Manual

If no key is activated for 1 minute, the display will return to the default state
1.0 without saving configuration changes.
1 Increase value / choose next parameter
2 Decrease value / choose previous parameter
3 Save the chosen value and proceed to the next menu
Hold 3 Back to previous menu / return to menu 1.0 without saving
Power up
0000
9999
1 2
3
™› 0000
— 12.2 ¤ PASSW.
˜ 20.0 ¤ Txt 1
1.1
1.0
1.0 = Default state.
Line 1 shows status for channel 1 and channel 2
Line 2 shows analogue value or tag no. for
channel 1. If the loop limit is exceeded (LO.LIM
and HI.LIM) the analogue value is shown for 5
sec. followed by txt 18. In case of loop break, 0.0
is shown for 5 sec. followed by txt 19.
Line 3 shows the same as line 2, only for
channel 2.
Line 4 shows status for communication.
1.1 = Only if password-protected.
1.2 = Loop current limits (identical for both channels)
can be deactivated by selecting values outside
the range 3.5...23 mA.
Line 1 symbols:
= OK. Flashing
™

RouTiNg diAgRAm

NO 0,0
YES 29,9
1 2 1 2
3 3
NO 3.5
ADV.SET LO.LIM1
Txt 2 Txt 3
1.2
YES 3
ADV.SET
Txt 2
= error.
œ
9106 - Product Version 9106-002
0,0 0,0
29,9 29,9
1 2 1 2
3 3
23.0 3.5
HI.LIM1 LO.LIM2
Txt 4
Txt 3
1.2 1.2
Continued on the page
Routing diagram ADV.SET
0,0
29,9
1 2
3 3
23.0
HI.LIM2
Txt 4
1.2
To default state 1.0
19