Visualisation In 4501 Of Hardware / Software Error - PR 9106B Manual

visualisation in 4501 of hardware / software error

Communications test 4501 / 9106B
EEprom error - check configuration
User error
User error
EEprom error - check configuration
Hardware error
Hardware error
Hardware error
Hardware error
Hardware error
Hardware error
Hardware error
! All error indications in the display flash once per second. The help text explains the error.
In case of cable fault the backlight also flashes. This can be reset by pressing the 3 key.
Errors affecting both channels are shown as error on channel 1 - and the line showing channel 2 is
blank.
Hardware error can be reset in two ways. Either step through the menus (if the other channel is to
stay in operation) or power cycle the device.
Readout at hardware error
Error search
9106 - Product Version 9106-002
Readout
NO.CO Connection error
Configuration error or crc
FL.ER mismatch, recovery
configuration is loaded
II ! / II !
Loop limit exceeded
II ! / II !
Loop error
EE.ER /
Invalid configuration
(CRC or data)
IE.ER
SU.ER Supply error
RA.ER RAM error
FL.ER Flash error
IN.ER Initialization error
C1.ER Hardware error - channel 1
C2.ER Hardware error - channel 2
DE.ER General error
Cause
13