Introduction; Purpose Of This Documentation; Further Information - Siemens 7NG3092-8KU Operating Instructions Manual

Sitrans accessories modem and siprom t for sitrans th100/th200/tr200/tf200/tf

Table of Contents

Introduction

1.1

This programming manual contains all information you need for commissioning and using

the modem and the SIPROM T parameterization software.

It is aimed both at persons mechanically installing the device, connecting it electronically,

configuring the parameters and putting it into operation, and at service and maintenance

engineers.

1.2

Information

The contents of these instructions shall not become part of or modify any prior or existing

agreement, commitment or legal relationship. All obligations on the part of Siemens AG are

contained in the respective sales contract, which also contains the complete and solely

applicable warranty conditions. Any statements contained herein do not create new

warranties or modify the existing warranty.

The content reflects the technical status at the time of printing. We reserve the right to make

technical changes in the course of further development.

Siemens Regional Offices

If you need more information or have particular problems which are not covered sufficiently

by the operating instructions, contact your local Siemens Regional Office. You will find the

address of your local Siemens Regional Office on the Internet.

Product information on the Internet

The Programming Manual forms a part of the supplied CD and is also available on the

Siemens homepage on the Internet. On the enclosed CD, you will find an extract of the

catalog FI 01 "Field devices for process automation" with the current ordering data. The

complete catalog FI 01 is available on the Internet.

7ng3092-8km