Linear 0.3A Speed Playback; Variable-Speed Playback - Panasonic AJ- DCP Operating Instructions Manual

Operation

Linear 0.3a speed playback

When the SEARCH button is pressed during still-
picture playback (PLAY PAUSE), the VTR is set to the
slow still mode.
When the FF or REW button is now pressed in this
mode, the VTR is set to the linear 0.3a speed
playback mode.
When the PAUSE/STILL button is pressed during
linear 0.3a speed playback, the tape is temporarily
stopped.
When the PAUSE/STILL button is pressed again,
linear 0.3a speed playback is resumed.
VTR
Button pressed
operating mode
Play PAUSE/STILL
PAUSE/STILL or
PLAY
Play pause
SEARCH
PLAY
Slow still FF
REW
REW
Forward slow
SEARCH or
PAUSE/STILL
FF
Reverse slow
SEARCH or
PAUSE/STILL
PAUSE/STILL,
SEARCH or FF
Forward slow still
REW
PAUSE/STILL,
SEARCH or REW
Reverse slow still
FF
PLAY
All modes
STOP
STOP 5 FF
All modes
STOP 5 REW

Variable-speed playback

(when the AJ-A95 is connected)
When the AJ-A95 (optional accessory) is connected to
the REMOTE connector, variable-speed playback can
be performed by operating the search dial on the AJ-
A95.
<Notes>
O Noise may appear on the screen at any playback
O During
Next VTR operation
Play pause
Play
Slow still
Play
Forward slow
Reverse slow
Reverse slow
Forward slow still
Forward slow
Reverse slow still
Forward slow
Reverse slow
Reverse slow
Forward slow
Play
Stop
Fast forward
Rewind
15
speed other than 1a (normal speed).
variable-speed
recorded on the analog cue track is played back.
playback, the sound